36V Electric Bike Replacement Charger for Swagtron EB5 Lithium Battery

The charger is a Lithium Battery Power Charger with an input of 100-240VAC 50/60Hz 2.0A Max and an output of 42V 2A. It features short circuit, overload, and overvoltage protection, making it globally applicable with a high efficiency and soft starting current to reduce the impact of AC input effectively. With a compact size and lightweight design, the charger has a cable length of 39.4 inches/100 cm.

The charger has one indication light that turns green when the battery is fully charged and red when it is charging. It automatically stops charging when the battery is full. The maximum operating temperature of the product is 40°C, and the charger case is made of high-quality, smooth plastic with no impurities.

The charger is compatible with various connectors, including DC5.5 x 2.1mm and DC5.5 x 2.5mm. The LED indicator turns red when the charger is working, and the charger may get slightly warm during operation. To improve heat dissipation, you can place two small blocks under the charger.

The charger automatically detects when the battery is fully charged, provided the battery has a BMS (Battery Management System) installed, and then switches off. This feature helps to protect the battery from overcharging.

The charger is suitable for use with the Swagtron eb7 Hyper e-city 700c e-bike with a 36V 250W rear hub motor, as well as the Swagtron EB5 and Meepo skateboard.

When using the charger, please follow these guidelines:

1. Charge the battery in a dry environment.
2. Do not leave the power supply connected when the charger is not in use.
3. Do not overcharge the battery. Disconnect the charger when the light turns green, indicating the battery is fully charged.
4. Charge the battery before it is completely drained to 0%. This helps to protect the battery and prevent damage.
5. If the battery has not been used for a long time (2-3 months), charge it before use to ensure it is not damaged.
6. Practice shallow discharging, and perform a deep discharge every 3 months to activate the long-term immobile material in the battery, which is beneficial for the battery's longevity.
7. Confirm that the battery type is compatible with the charger. Do not use the charger with LiFePO4 batteries, as it may overheat.
8. When charging, connect the battery to the charger cable first, then connect the charger to the AC power. After the battery is fully charged, disconnect the power and then remove the battery plug. Disconnecting the battery plug while charging, especially with a high charging current, can damage the device.

By following these guidelines, you can ensure the safe and efficient use of the charger with your compatible devices.

product information: